Ruby is one of the most precious gemstones on Earth that is always high in demand especially in the jewelry industries. Due to its high value and very expensive, a lot of imitation of ruby has been made. This results in the rising of more complicated issues as gemologists need to perform the grading valuation very carefully and precisely. The current and common grading techniques mostly depend on human vision, which eventually leads to error. This paper aims to analyze the clarity of rubies gemstones using Charge-Coupled Device (CCD). The CCD detects the light intensity and then convert the light intensity value into the voltage value. The CCD sensor is very special in its architecture design, consisting of more than 1000 very small pixels that are sensitive to light sources. Based on the previous research, CCD has high sensitivity to laser light source with wavelength range within 430 nm to 650 nm. This research is going to prove that CCD is able to detect the clarity of various grading of the pink to blood-red ruby stones.

Due to its vast number of suitable applications, Cyber-Physical Systems (CPS) has been one of the emerging and rapidly-developed technologies in modern life. Its applications can be integrated and deployed in numerous sectors, for instance the automobile, home appliances, medical and industrial sectors. This field has seen immense development and research taking place, including the architecture model, security, communications mode, control systems model and also signal processing. CPS plays an important role in Industrial Revolution 4.0, where it is an integration of urbane network with intelligent production or process system.CPS main objective is to control the global networks with high credibility of data secured.This paper is basically a review of the CPS architectures, characteristics and its applications in daily basis. This review paper discusses how CPS are implemented in various industries and how it improves the efficiency of a system or application. Additionally, security enhancements in certain aspects of CPS application will also be reviewed and addressed.

Nowadays, the innovation and production of prayer seats can widely be seen around the world particularly in a nation or region with a majority of Muslim population. Demands on this assistive device are everywhere in order to ease and help disabled Muslims to conduct their daily prayers. Most of the existing devices consist of basic systems and sometimes do not accurately meet disabled Muslims’ requirement. The main objective of this research is to design and develop a Solah chair using electronic sensor to assist disabled Muslims to perform Solah and other ritual activities comfortably. This research uses four types of electrical and electronic systems namely the ultrasonic system, DF player system, counter system and IR sensor system to assist disabled Muslims to perform Solah and other ritual activities such as zikir and listening to Quran recitation. Arduino Uno is used to integrate these four subsystems. Arduino as the main micro-controller for this system is chosen for its convenience and capabilities to read and run C-language. It is also a simple platform which is suitable for many IT projects in general.

Electrical capacitance tomography (ECT) is a non-intrusive and non-invasive internal visualization tool that facilitates improved quantification by producing cross-sectional distribution information for any kind of multiphase flow. In a coal-fired power station, there are some concerning issues such as the sedimentation of pulverized coal in the piping system before it reaches the boiler system and the non-uniformity of its velocity, which contributes to a reduction in electricity generation and higher carbon dioxide emissions. The aim of this paper is to provide a review based on various research works on pulverized coal that utilized ECT system. This paper also consists of principle of ECT, image reconstruction, and velocity measurement. Further research and works will be executed based on the preliminary data gained to improve the existing works.

Non-destructive test (NDT) is widely used in industrial applications due to its reliability as well as flexibility. Rather than other methods, NDT is more suitable and practical to be performed in order to detect flaws and deterioration in concrete structures. This paper provides a review by studying various research works on concrete by performing ultrasonic technique NDT. In particular, the working principle of ultrasonic NDT, type of sensor and techniques adopted in ultrasonic NDT are briefly described in this paper. Further research based on preliminary data will be conducted to improve previous experimental work.

Ninety percent of the ruby stones available worldwide come from Myanmar. Malaysia is known to be one of the countries that have been importing ruby stones for precious stone industries, manufacturing industries, medical and dentistry applications. There are several gemology tools which are used to investigate the grading of ruby stones such as loop, microscope, and dichroscope. Nevertheless, these tools are highly dependable on human visual assessment and require years of experience that may lead to error since ruby stone quality is evaluated based on its clarity and transparency. Hence, this paper addresses a simulation study on the optical properties of ruby stones via Charge-Coupled Device (CCD) Tomography approach. This paper indicates the capability of CCD and tomography system to analyze the ruby stone optical properties through image reconstruction based on the previous research. Linear Back Projection (LBP) algorithm will be used to construct two-dimensional image reconstruction of varieties ruby stones. From these image reconstructions, the transparency and blemishes of ruby stones can be analyzed.

This research discusses an application of Couple-Charge Device (CCD) linear sensor and laser diode in an optical tomography (OPT) system. Tomography is a system that could capture a cross-sectional image based on sensor data scattered across the periphery of the examining device in non-invasive and non-intrusive framework. This project is focusing on how to quantify the level of object transparency based on CCD and mathematical modelling assessment. The objective of this project is to investigate the light refraction, reflection and absorption effect on object transparency. The study will include discussion on the light parameters and its mathematical expression. The voltage output measured by CCD defines the degree of intensity of light that is obtained after penetrating through different object transparency. In conclusion, this research has successfully proved the potential of CCD in OPT configuration to detect different size diameter of targeted transparent object which is the air bubble in non-flowing crystal-clear liquid.

This research discusses an application of Couple-Charge Device (CCD) linear sensor and laser diode in an optical tomography (OPT) system. Tomography is a system that could capture a cross-sectional image based on sensor data scattered across the periphery of the examining device in the non-invasive and non-intrusive framework. This project focuses on quantifying the level of object transparency based on CCD and mathematical modelling assessment. The objective of this project is to investigate the light refraction, reflection and absorption effect on object transparency. The study will include a discussion on the light parameters and its mathematical expression. The voltage output measured by CCD defines the degree of intensity of light obtained after penetrating through different object transparency. In conclusion, this research has successfully proved the potential of CCD in OPT configuration to detect different size diameters of a targeted transparent object, which is an air bubble in non-flowing crystal-clear liquid.

Presently, Malaysia is fostering growth in the green energy sector in order to reduce its carbon emissions and contribute in the fight against global warming. Renewable Energy (RE) such as solar cell could no longer be considered as a green technology because at the end of their lifecycle, they become non- biodegradable waste which in turn constitutes pollution and contributes to global warming. Thus, the aim of this research is to study a self-sustaining solar module produced by upcycling solar cells from non- biodegradable waste. Several solar cells from electronic devices were reused in this study. The results obtained show that a combination of 4V, 3V and 2V reused solar cells produced 10.20V and 47.9mW of power. This indicates that the proposed upcycled solar module is feasible and has the potential to aid in the promotion of clean and renewable energy use in order to attain the desired sustainable development goals.

The world developed rapidly to provide better standard of living to the human being. Industrial revolution 4.0 promising in great revenue, investment and technological advancement to the society and various sectors. This paper presents an overview of tomography system towards the industrial revolution 4.0. Tomography is essentially a technique for showing an image representation through solid objects, such as a pipeline or the human body, in the two-dimensional and three-dimensional cross sections. Several tomography sensors, including optical tomography systems, ultrasonic tomography systems and an electrical tomography system, are discussed in terms of their hardware and image reconstruction. To provide a clear view of tomography system, a few examples of tomography system application in medical and process industries are discussed.