The influence of main emulsion components namely Arabic gum (13-20% w/w), xanthan gum (0.3-0.20% w/w) and orange oil (10-14% w/w) on semi-quantitative headspace analysis of target volatile flavor compounds released from a model orange beverage (diluted orange beverage emulsion) was evaluated by using a three-factor circumscribed central composite design (CCCD). For optimization procedure, the peak area of 13 volatile flavor compounds (i.e. ethyl acetate, ?-pinene, ethyl butyrate, ?-pinene, 3-carene, myrcene, limonene, ?-terpinene, octanal, decanal, linalool, neral and geranial) were considered as response variables. The response surface analysis exhibited that the significant (p < 0.05) second-order polynomial regression equations were successfully fitted for all response variables except for ethyl butyrate. A satisfactory coefficient of determination (R2) ranged from 0.831 to 0.969 (>0.8) was obtained for the response variables studied. No significant (p > 0.05) lack of fit was indicated for the reduced models except for the models fitted for limonene and linalool. This observation confirmed an accurate fitness of the reduced response surface models to the experimental data. The multiple response optimizations indicated that an orange beverage emulsion containing 15.87% (w/w) Arabic gum, 0.5% (w/w) xanthan gum and 10% (w/w) orange oil was predicted to provide the minimum overall flavor release. � 2007 Elsevier Ltd. All rights reserved.

In the present work, the effect of type and concentration of two hydrocolloids namely pectin (1.5%, 3% and 4.5%) and CMC (0.1%, 0.3% and 0.5%) on physical stability, turbidity loss rate, cloudiness and flavor release of orange beverage emulsion was investigated during six months storage. From the turbidity loss rate results, the orange beverage emulsions containing 4.5% and 1.5% (w/w) pectin showed the highest and least storage stability, respectively. In contrast to the first two months storage, the replacement of both supplementary emulsion components resulted in a significant (p < 0.05) increase in turbidity loss rate of all orange beverage emulsions, thus indicating a decrease in capability of beverage emulsion to maintain the cloudiness during storage. The cloudiness of all samples significantly (p < 0.05) decreased during storage. The differences between the volatile release behaviors of target volatile compounds from orange beverage emulsions having different formulations indicated that the overall volatile flavor release was strongly influenced by the emulsion composition. This finding may be explained by the interactions between emulsion matrix and volatile flavor compounds. The release contents of most of target flavor compounds were significantly (p < 0.05) decreased during storage, especially for the aldehyde compounds studied (i.e. octanal, decanal, neral, geranial). � 2007 Elsevier Ltd. All rights reserved.

The possible relationships between the main emulsion components (namely, Arabic gum, xanthan gum, and orange oil) and the physicochemical properties of orange beverage emulsion were evaluated by using response surface methodology. The physicochemical emulsion property variables considered as response variables were emulsion stability, viscosity, fluid behavior, ?-potential, and electrophoretic mobility. The independent variables had the most and least significant (p < 0.05) effect on viscosity and ?-potential, respectively. The quadratic effect of orange oil and Arabic gum, the interaction effect of Arabic gum and xanthan gum, and the main effect of Arabic gum were the most significant (p < 0.05) effects on turbidity loss rate, viscosity, viscosity ratio, and mobility, respectively. The main effect of Arabic gum was found to be significant (p < 0.05) in all response variables except for turbidity loss rate. The nonlinear regression equations were significantly (p < 0.05) fitted for all response variables with high R2 values (>0.86), which had no indication of lack of fit. The results indicated that a combined level of 10.78% (w/w) Arabic gum, 0.56% (w/w) xanthan gum, and 15.27% (w/w) orange oil was predicted to provide the overall optimum region in terms of physicochemical properties studied. No significant (p > 0.05) difference between the experimental and the predicted values confirmed the adequacy of response surface equations. � 2007 American Chemical Society.

This paper focuses on the development of an effective methodology to determine the optimum levels of three independent variables leading to (a) maximize turbidity, (b) minimize polydispersity index (PDI) and (c) obtain the target value for average particle size and density of orange beverage emulsion. A three-factor central composite design (CCD) was employed to determine the effect of Arabic gum content (7-13% w/w), xanthan gum content (0.1-0.3% w/w) and orange oil content (6-10% w/w). The emulsion properties studied as response variables were: turbidity (Y1), average particle size (Y2), PDI (Y3) and density (Y4). The response surface analysis was carried out to create efficient empirical models for predicting the changes of response variables. In general, analysis of variance (ANOVA) showed high coefficients of determination values (R2) in the range of 0.922-0.975 for the response surface models, thus ensuring a satisfactory adjustment of the polynomial regression models with the experimental data. The results of regression analysis indicated that more than 92% the response variation could be explained by the models. The results also indicated that the linear term of xanthan gum was the most significant (p<0.05) variable affecting the overall responses. The multiple optimization results showed that the overall optimum region with high total desirability (D=0.92) was found to be at the combined level of 13.88% w/w Arabic gum content, 0.27% w/w xanthan gum content and 11.27% w/w orange oil content. Under the optimum condition, the corresponding predicted response values for turbidity, average particle size, PDI and density of the desirable orange beverage emulsion were 129.55, 988, 0.261 and 1.03, respectively. For validation of the models, the experimental values were compared with predicted values to check the adequacy of the models. The experimental values were found to be in agreement with those predicted, thus indicating suitability of the models employed using response surface methodology (RSM) for optimizing the physical properties of the orange beverage emulsion. � 2007 Elsevier Ltd. All rights reserved.

Headspace solid-phase microextraction (HS-SPME) gas chromatography was used to analyze target flavor compounds in orange beverage emulsion. The effects of SPME fiber (PDMS 100 μm, CAR/PDMS 75 μm, PDMS/DVB 65 μm and DVB/CAR/PDMS 50/30 μm), adsorption temperature (25-45 °C), adsorption time (5-25 min), sample concentration (1-100%), sample amount (5-12.5 g), pH (2.5-9.5), salt type (K2CO3, Na2CO3, NaCl and Na2SO4), salt amounts (0-30%) and stirring mode were studied to develop HS-SPME condition for obtaining the highest extraction efficiency and aroma recovery. For the head space volatile extraction, the optimum conditions were: CAR/PDMS fiber, adsorption at 45 °C for 15 min, 5 g of diluted beverage emulsion (1:100), 15% (w/w) of NaCl with stirring and original pH 4. The main volatile flavor compounds were: limonene, 94.9%; myrcene, 1.2%; ethyl butyrate, 1.1%; γ-terpinene, 0.41%; linalool, 0.36%; 3-carene, 0.16%; decanal, 0.12%; ethyl acetate, 0.1%; 1-octanol, 0.06%; geranial, 0.05%; β-pinene, 0.04%; octanal, 0.03%; α-pinene, 0.03%; and neral, 0.03%. The linearity was very good in the considered concentration ranges (R2 ≥ 0.97). Average recoveries ranged from 88.3% to 121.7% and showed good accuracy for the proposed analytical method. Average relative standard deviation (RSD) for five replicate analyses was found to be less than 14%. The limit of detection (LOD) ranged from 0.06 to 2.27 mg/l for all volatile flavor compounds and confirmed the feasibility of the HS-SPME technique for headspace analysis of orange beverage emulsion. The method was successfully applied for headspace analysis of five commercial orange beverage emulsions.

The potential use of medium- and long-chain triacylglycerols (MLCT) oil blends in food applications such as frying oil and salad dressings were investigated. The frying strength of palm-based MLCT oil with different antioxidants under deep frying conditions was assessed. Palm-based MLCT oil showed better thermalresistant oxidative strength than refined, bleached and deodorized (RBD) palm olein throughout the five consecutive days of frying. Sensory evaluation and rancidity assessment on fried chips showed no significant differences (P > 0.05) between chips fried in RBD palm olein and palm-based MLCT oil. MLCT-based salad dressings treated with different antioxidants showed similar rheological behaviors as compared to soybeanbased salad dressings. The overall quality of the physical appearance and organoleptic acceptability based on quantitative descriptive analysis showed no significant differences (P > 0.05) in all salad dressings. These findings indicated that MLCT-based oil blends can be used as healthy functional oil for daily consumption. � 2011.