Publication: Silver-graphene oxide nanocomposite film-based SPR sensor for detection of Pb2+ ions
No Thumbnail Available
Date
2018
Journal Title
Journal ISSN
Volume Title
Publisher
Institute of Electrical and Electronics Engineers Inc.
Abstract
This study discussed the effect of nanocomposite film's thicknesses on the generation of SPR for detection of Pb2+ ions. Ag-GO nanocomposite film was deposited on the hypothenuse side of the triangular prism via Kretschmann configuration. The thicknesses of Ag-GO were varied between 50nm and 60nm by manipulating the Ag's thicknesses from 30nm to 50nm and GO's between 2nm and 10nm. The optimum SPR signal was obtained as thickness of Au-GO was fixed at 50nm with tAg=48nm and tGO=2nm resulting 75.77% of SPP excitation. As thicknesses of GO increased above 2nm and thicknesses of Ag were set less or more than 48nm, the SPP excitation became weaker. The sensitivity of SPR sensor shows a good agreement with the generation of SPP. The sensor exhibits the optimum sensitivity of s=0.452�/RIU with angle shifting of 0.905�as nanocomposite film under configuration of tAg=48nm: TGO=2nm and tAg=50nm: TGO=2nm were employed. In conclusion, the amplification of SPR sensor's sensitivity can be achieved by introducing 50nm nanocomposite films consist of �2nm thicknesses of GO. � 2018 IEEE.
Description
Keywords
Ag-GO, Kretschmann configuration, nanocomposite film, sensitivity, SPR sensor, Graphene, Nanocomposites, Graphene oxide nanocomposites, Kretschmann configuration, Optimum Sensitivity, sensitivity, SPR sensors, SPR signals, Triangular prism, Nanocomposite films