Jamil N.W.Z.Yahya M.Z.A.Jumal J.Kasim N.A.M.2024-05-282024-05-28201997807400000000094243X10.1063/1.50893632-s2.0-85061672167https://www.scopus.com/inward/record.uri?eid=2-s2.0-85061672167&doi=10.1063%2f1.5089363&partnerID=40&md5=8699c46b9497b206a08481248a2716b6https://oarep.usim.edu.my/handle/123456789/9369Thiazole-4-carboxamide (Th) has been prepared as ionophore in an electrochemical setup of a cadmium ion selective electrode (ISE). There are four components in liquid polymeric membrane consist of thiazole-4-carboxamide (Th) as an ionophore, polyvinyl chloride (PVC) as a polymeric matrix, sodium tetra phenyl borate (NaTPB) as an ionic additive and benzyl acetate (BA) as a plasticizer. An experiment is conducted using various different composition of the membrane. Result shows the optimum ratio of Th:PVC:NaTPB:BA is 5.0:30.0:2.0:63.0 by weight percentage. The Nernstian response for Cd 2+ that obtained the best response at a range pH 5.20-5.72 is having a slope of 29.4�1.1mV per decade with a linear working range 1.0�10 -7 to 1.0�10 -4 . However, the worst Nernstian response for Cd 2+ at the same range of pH is having a slope of 15.7�0.6mV per decade with linear working range of 1.0�10 -4 to 1.0�10 -2 and using 0.0:33.0:2.0:65.0 as a ratio of Th:PVC:NaTPB:BA by weight percentage. � 2019 Author(s).en-USLiquid polymeric membrane composition of ion selective electrode based on thiazole-4-carboxamide as ionophoreConference Paper20685089363