Ahmad Adnan Abu BakarMuhammad Zulhilmi ZainuddinShahino Mah AbdullahNizam TamchekIkhwan Syafiq Mohd NoorMuhammad Syafiq AlauddinAhmad AlforidiMohd Ifwat Mohd Ghazali2024-05-282024-05-2820222022-11-29Abu Bakar, A.A.; Zainuddin, M.Z.; Abdullah, S.M.; Tamchek, N.; Mohd Noor, I.S.; Alauddin, M.S.; Alforidi, A.; Mohd Ghazali, M.I. The 3D Printability and Mechanical Properties of Polyhydroxybutyrate (PHB) as Additives in Urethane Dimethacrylate (UDMA) Blends Polymer for Medical Application. Polymers 2022, 14, 4518. https:// doi.org/10.3390/polym142145182073-436010.3390/polym14214518https://www.mdpi.com/2073-4360/14/21/4518https://oarep.usim.edu.my/handle/123456789/7172Volume 14 Issue 21The integration of additive manufacturing (3D printing) in the biomedical sector required material to portray a holistic characteristic in terms of printability, biocompatibility, degradability, and mechanical properties. This research aims to evaluate the 3D printability and mechanical properties of polyhydroxybutyrate (PHB) as additives in the urethane dimethacrylate (UDMA) based resin and its potential for medical applications. The printability of the PHB/UDMA resin blends was limited to 11 wt.% as it reached the maximum viscosity value at 2188 cP. Two-way analysis of variance (ANOVA) was also conducted to assess the significant effect of the varied PHB (wt.%) incorporation within UDMA resin, and the aging duration of 3D printed PHB/UDMA on mechanical properties in terms of tensile and impact properties. Meanwhile, the increasing crystallinity index (CI) of X-ray diffraction (XRD) in the 3D printed PHB/UDMA as the PHB loading increased, indicating that there is a strong correlation with the lower tensile and impact strength. FESEM images also proved that the agglomerations that occurred within the UDMA matrix had affected the mechanical performance of 3D printed PHB/UDMA. Nonetheless, the thermal stability of the 3D printed PHB/UDMA had only a slight deviation from the 3D printed UDMA since it had better thermal processability.en-USadditive manufacturing; 3D printing; polyhydroxybutyrate; mechanical properties; medical applicationArticle1201421