Rashid A.R.A.Kamarudin N.A.Mohamad I.S.Norizan M.N.2024-05-282024-05-282018-121985-5761E-ISSN: 1997-44342-s2.0-85064112385https://www.scopus.com/inward/record.uri?eid=2-s2.0-85064112385&partnerID=40&md5=8849dd11029a2ce4e6faa28d155b3a25https://ijneam.unimap.edu.my/index.php/vol-11-dec-2018-special-issue-bond21https://oarep.usim.edu.my/handle/123456789/9280International Journal of Nanoelectronics and Materials Volume 11 (Special Issue) Dec 2018 [187-194]Zinc oxide (ZnO) is a semiconductor material which is widely used as thin films due to its advantages in wide band gap, high electron mobility, large exciton binding energy and others. The uniqueness of this semiconductor material is a different fabricating method may differentiate its optical characteristics such as transmittance and absorbance allowing it to suit various applications. In this research, ZnO thin films were prepared by the sol–gel method on glass substrate. Zinc acetate dihydrate, isopropyl alcohol, and monoethanolamine were used as a precursor, solvent, and stabiliser respectively. The effects of ageing and thickness of ZnO on optical properties were discussed. The thickness of thin films varied according to the number of dips in coating, which were 1 dip, 3 dips, 5 dips, or 7 dips. Meanwhile, the ageing duration varied between 12 hours, 24 hours, or 48 hours. The influence of thickness and ageing on the optical properties of ZnO were investigated by ultraviolet-visible (UV-Vis) spectroscopy. When the thickness is increased, the transmittance and the band gap are reduced due to compressive stress and lattice defects. When the ageing duration is increased, the film becomes smoother.en-USSol-gel methodTransparent conductive oxideZinc oxideArticle18719411Special Issue